Euphonix Media Application Controller Operation Manual DAW Integration
115
To configure the Surround Panner:
1. Open Pro Tools Peripherals->MIDI Controllers.
2. Assuming you have four HUIs configured, re-assign controller #4 to Sur-
roundPnr in the Type field.
3. Set Receive From and Send To to the appropriate EuCon port, as defined in
EuPrefs Pane.
If you have a previous HUI assignment, first select None, then re-assign to a
EuMIDI port.
4. Close the Pro Tools Peripherals Setup WIndow.
5. Press Soft Key Bank 6 on the MC and you will see the controls for the Sur-
round Panner assigned in the Pro Tools Appset (pre-installed with the MC from
the factory).
6. You must use the JL Cooper Surround Panner’s Previous/Next and Up/Down
functions, which are assigned to Soft Keys, to move the Surround Panner from
Track to Track and from Channel Pan to Aux Pan, respectively.
7. If Soft Key Bank 6 has no Surround Panner assignments, you may assign them
from the EuCon/HUI Processor by adding a EuCon command in Soft Key Set-
up and selecting Prev/Next, Up/Down and other MCSPanner functions. Please
refer to the JL Cooper MCS Panner user guide (www.jlcooper.com) for com-
plete instructions.
To Next Page
Loading...
Need help?
General
