Euphonix Media Application Controller Operation Manual Soft Keys
51
To lock a section:
1. Bring the application into focus in which you intend to lock a section to.
The application is listed at the top-left corner of the MC touchscreen.
2. Press the Setup button of the MC section (Left Edit, Soft Key, or Right Edit) be-
ing locked.
3. Press the Strip Control Setup button to select the faders/joystick panners to
lock.
4. Touch the Lock Section button to lock the section to the application on the
MC’s current workstation.
SHORTCUT: To quickly lock a section to an application, put the application in focus,
hold down the Shift key on the MC keyboard, and press the Setup key
of the section to lock. To unlock, repeat this step.
The selected section is shown at the top-left of the Locking tab Touchscreen. If that sec-
tion is currently locked, the top button of the Locking tab changes from Lock Section
to Unlock Section with a red lock icon to its left (Figure 5-8). The application and
workstation to which the section is locked are listed to the right of the button.
A locked Soft Key section retains its currently assigned commands until it is unlocked
or its individual App Set sections are unlocked.
The fader/joystick section retains its channel control when locked.
The Monitor and Control Room sections continue to monitor the outputs/application
they were locked to.
Press the Unlock All Appset Sections button (appears only when one or more Soft Key
sections are locked) to unlock all currently locked Soft Key sections, without unlocking
the fader/joystick, monitors, or control room sections.
Press Unlock All Sections to unlock all currently locked sections.
NOTE: If any Soft Key section is locked, the Application Set cannot be edited and Soft
Key definitions cannot be changed. All Soft Key (App Set) sections must be
unlocked before changing Soft Key definitions.
To Next Page
Loading...
Need help?
General
