26 04-2017 5325 00
aDjustiNg tHE griNDEr softwarE
If for any reason, such as grinder mainte-
nance, major changes in the distance are
required, you can set the desired changed
value manually via software.
grinder door ring.
To increase the grain size (coarser grind), it
is automatically adjusted in a single opera-
tion;
grinder motor is in operation.
It is advisable to intercept the released
unit from getting clogged up.
calibratioN
rEfErENcE sElEctioN
The selection is determined by default and
you cannot change it.
coffEE DosE
used by the brewing unit is 9 g.
-
vice lever.
watEr DosE
The type of selection determines the
amount of water to be dispensed.
After setting the water value on the refer-
ence selection, the machine will ask you to
enter the infusion time.
brEwiNg timE
The degree of the grinding has a direct ef-
water doses are the same.
By changing this value, the automatic
grinder adjustment system, acts to align the
actual time with that required.
When the appliance is in normal user
mode, continually monitoring this time will
allow you to have the optimum grinding
degree.
otHEr sElEctioNs
given selection. For reference selections,
the infusion time is a non-editable value
and is linked to the reference selection.
watEr DosE
The amount of water (expressed in cdv)
to be dispensed for each selection can be
-
ence selection.
coffEE DosE combiNatioN
Even though this combination can be
changed, the choice to do so should be
made very carefully since it has a substan-
drink.
To Next Page
Loading...
