Installation
Agilia - User Guide 14
1. Connect the power cable to the power supply unit.
2. Plug the power supply unit connector into the printer.
3. Plug the end of the power cable into an earthed power socket.
The printer is powered on: the control panel lights up showing the printer is working properly.
If the printer is not showing a Ready status, check the installation.
Installing Evolis Premium Suite 2
Evolis Premium Suite 2 is an all-in-one driver software solution that makes interactions between printer and computer more intuitive. Its advanced features
automate printer configuration.
It includes
l
A supervision of printers: printer status information, remaining ribbon capacity, etc.
l
A powerful tool for printer settings
l
A notification center to alert users when their intervention is required
l
A printer management and maintenance station
l
A series of wizards to guide you through cleaning and encoding operations, etc.
l
An encoding station (magnetic encoding, etc.)
l
A diagnostic tool
To Next Page
Loading...
