Evolis AGILIA - Installation procedure; Connecting to a network (option)

Installation
Agilia - User Guide 15
Installation procedure
Make sure the printer is disconnected from the computer before installing Evolis Premium Suite 2.
All versions of Windows require the user to have administrator rights to install the driver.
When installing Evolis Premium Suite 2 in macOSenvironment, an adapter may be required. Make sure to connect the adapter to the computer first
and then connect the USB cable of the printer for the printer to be detected.
It is possible to select Standard or Minimal installation: Standard installation is recommended as it includes notification and supervision features.
In case of a network installation, the printer driver must be installed in Minimal installation.
1. Download the Driver/Premium Suite file (.exe for Windows and .pkg for macOS) on www.evolis.com > Support section > Product page.
2. Double click on the installation file to launch the installation program and follow the instructions.
3. At the end of the installation, restart the computer, if requested.
4. Connect the printer to the computer with the USB cable.
Connecting to a network (option)
Contact your System and Network Administrator before connecting to or changing the settings for your local area network.
Changing the printer’s basic settings without prior knowledge of the layout of the LAN in question or without genuine technical knowledge may
result in a malfunction of the printer, and may even extend to more widespread failure of all or part of the LAN.
For further details, contact your reseller to obtain the Network Installation Guide.
Evolis printers fitted with a TCP/IP network interface have an embedded http server.
The printer is, by default, configured in DHCP mode (Dynamic Host Configuration Protocol), which means that its IP address is supplied by the
network.
Evolis printers can be fitted with a TCP/IP network connection.