Maintenance
Agilia - User Guide 41
Cleaning procedures
Regular cleaning
The print head warranty is directly linked to the regular cleaning of the printer.
Failure to perform this cleaning at the required times leads to the invalidity of the print head warranty.
The printer is fitted with a cleaning warning system, which is triggered after a certain number of cards have been inserted. Proceed with the regular
cleaning of the printer as soon as the warning is triggered. If you continue to run the printer despite the warning and if the warning light remains lit,
the print head warranty is void because of failure to comply with contractual maintenance obligations.
When cleaning the print head:
l
Avoid any contact between the print head and any metal or sharp objects. This could permanently damage the print head.
l
Avoid touching the print head directly with your fingers, as this could affect print quality or permanently damage the print head.
Recommended cleaning cycle: Every time the retransfer film is changed. For more information, refer to the Cleaning kit safety datasheet
(www.evolis.com >Consumables).
Mandatory cleaning cycle: When the cleaning warning is triggered.
Servicing accessories: Adhesive cleaning card with 2 adhesive-free zones and cleaning swab impregnated with isopropyl alcohol.
Cleaning cycles can also be launched from the Evolis Premium Suite 2 by clicking on the Cleaning icon on the Home page.
Cleaning cycles can be launched from the LCDtouchscreen (for printers equipped with an LCD touchscreen). Refer to the corresponding user guide
available on www.evolis.com > Support section > Product page.
When the cleaning cycle is over, wait 2 minutes before using the printer to let the alcohol evaporate.
Video(s) of the procedure(s) available on Evolis YouTube channel.
To Next Page
Loading...
