Maintenance
Agilia - User Guide 38
MAINTENANCE
Comply with the instructions given below to ensure a good functioning of the printer.
The manufacturer’s warranty is subject to a strict compliance with the routine servicing and maintenance instructions, and in particular the printer
cleaning cycles.
Any failure to follow the maintenance and servicing procedures described in this section voids the print head warranty.
Evolis declines any liability where there has been a failure to carry out required maintenance on the printer.
The print head is a wearing part and a sensitive printer component. Its useful life can be reduced by the presence of dust, liquids or solids in the printer’s
immediate environment, on the print head or on the cards. Users must take all necessary precautions to insert only clean cards, free of dust deposits or foreign
bodies, into the machine.
The frequency and quality of cleaning are decisive factors enabling users to extend the print head’s useful life and to ensure excellent print quality.
In addition, the use of Evolis High Trust® consumables ensures that the printer operates properly. Use of non-Evolis High Trust® consumables may affect the
quality and reliability of print jobs, and even affect the printer’s operation. The manufacturer’s warranty does not cover physical damage or quality problems
caused by the use of non-Evolis High Trust® ribbons.
Evolis provides replacement parts and consumables that you can refer to on www.evolis.com.
To Next Page
Loading...
