Evolis AGILIA - Installing cardPresso

Installation
Agilia - User Guide 16
To connect the printer, use the Network installation wizard available from the Evolis icon in the taskbar.
The network administrator can configure the printer in order to comply with the constraints imposed by the corporate LAN:
l
Printer connected in a subnet, in DHCP
l
Printer connected in a subnet with fixed IP address, and WINS resolution
l
Printer connected in a subnet with fixed IP address, and no WINS resolution

The printer may be identified on the network in two ways:
l
By its Hostname (NETBIOS)
l
By its IP address
The Network connection wizard automatically detects all the Evolis printers installed.

The following settings can be configured:
l
Printer IP address
l
Subnet mask
l
Gateway
l
WINS server
Installing cardPresso
For information on how to use cardPresso card designer, see cardPresso Help Center.

1. Go to www.cardpresso.com > Solutions >cardPresso >Latest release to download cardPresso software.
2. Windows: Double click on the .exe file to launch the installation file and follow the installation wizard.
macOS: Double click on the downloaded .dmg file. Then drag and drop the application icon in the Applications folder.
3. At the end of the installation wizard, a pop-up window is prompted to register the license key. Type the activation code provided with the printer and
click Activate.
4. Click Continue to finalize the installation.