Evolis AGILIA - Identifying installed software versions

Help
Agilia - User Guide 51
Printing a graphical test card
The graphical test card is used to confirm the print quality, the absence of any potential offsets, and whether the ribbon is synchronized correctly.
When printing a graphical test card:
l
Make sure there are at least one card, a printing ribbon and retransfer film (for retransfer printers) in the printer.
l
Make sure the printer is ON.
l
Wait for all print jobs to be finished.
Print a graphical test card from Evolis Premium Suite 2
1. Select the printer.
2. Go to Printer settings.
3. Click the three-dot button (top right corner of the interface) and select Print a graphical test card.
4. Printing of the graphical test card starts.
Print a graphical test card from the LCD Touchscreen
1.
Click the Settings icon , then Printer test icon and finally the Graphical test card icon .
2. Printing of the graphical test card starts.
Identifying the installed software versions
In Evolis Premium Suite 2, go to Assistance & Maintenance > Product information > Software versions.

The following information can be found there:
l
Installed version of Evolis Premium Suite 2
l
Installed printer firmware
l
Installed LCD firmware and graphics resources (for printers equipped with an LCDtouchscreen)