Evolis AGILIA - Printing test cards

Help
Agilia - User Guide 50
Printing a technical test card from the printer
1. Wait for any current print jobs to finish.
2.
Press the power button for four to five seconds until it goes out.
3. Press and hold down the power button again.
4. The power button light comes on.
5. Release the power button once the light flashes.
6. Printing of the technical test card starts (in color or monochrome depending on the installed ribbon and on both sides or one side of the card depending
on the printer feature).
7. The printed card is ejected into the output hopper.
Print a technical test card from Evolis Premium Suite 2
1. Select the printer.
2. Go to Printer settings.
3. Click the three-dot button (top right corner of the interface) and select Print a technical test card.
4. Printing of the technical test card starts.
Print a technical test card from the LCD Touchscreen
1.
Click the Settings icon , then Printer test icon and finally the Technical test card icon .
2. Printing of the technical test card starts.