Product presentation
Agilia - User Guide 8
PRODUCT PRESENTATION
Unpacking
When receiving the printer, print a technical test card to make sure that the printer operates properly.
The printer is shipped in a packaging designed to prevent damage in transit. If visible damage is noticed when unpacking the product, contact the
shipper and immediately inform your reseller, to know the procedure to follow.
The full original packaging (outer box, inner wedges and protective bags) is required in the event that the printer is returned. Keep the packaging
somewhere clean and dry. If the printer is returned without its original packaging and components are damaged during transit, these components
are no longer covered by the warranty. You will be charged for new packaging for shipping the printer back to you.
If any of the accessories is missing, contact your reseller.
Use only the power supply unit and USB cable supplied with the product.
The printer must be placed in a dry location, protected from dust and drafts but well-ventilated.
Make sure to keep the printer on a flat surface able to bear its weight.
A step by step tutorial to install the product is available on www.evolis.com > Support section > Product page (I Install my product).
Accessories supplied with your printer:
l
Power supply unit FSP type FSP150-AAAN3
l
Main power cable
l
USB cable
l
Starter cleaning kit
l
Quick installation guide with a URL to download the printer driver
l
License activation card for cardPresso designing software
To Next Page
Loading...
