Evolis AGILIA - Removing printed cards; Cards are ejected in the rear output box

Installation
Agilia - User Guide 25
Removing printed cards
By default, the printed cards are ejected in the rear output box and the error cards are ejected in the front output box.
The card output can be specified in Evolis Premium Suite 2 > Printer settings > Printing > Card > Card input / output > Card output.
The options are:
l
Output hopper (rear output box)
l
Reject box (front output box)
l
Manual ejection (Bezel)
Cards are ejected in the rear output box
The rear output box has a total capacity of 100 cards (0.76 mm – 30mil).

1. If the rear output box is supplied with a cover, pull the cover backwards.
2. Collect the cards using the side opening.