TECHNICAL REFERENCE MANUAL Dyvi 2.0.7.2
Compliance 3
3. Compliance
3.1 Safety
This equipment has been designed and tested to meet the requirements of
the following:
DIN EN 60950-1:2014-8; VDE 0805-1:2014-08
Information technology equipment - Safety - Part 1: General requirements
(IEC 60950-1:2005, modified + Cor.:2006 + A1:2009, modified +
A1:2009/Cor.:2012 + A2:2013, modified); German version EN 60950-
1:2006 + A11:2009 + A1:2010 + A12:2011 + AC:2011 + A2:2013
3.2 EMC Standards
This equipment complies with following EMC standards:
DIN EN 61000-3-2:2010-03; VDE 0838-2:2010-03
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic
current emissions (equipment input current <= 16 A per phase) (IEC
61000-3-2:2005 + A1:2008 + A2:2009); German version EN 61000-3-
2:2006 + A1:2009 + A2:2009
DIN EN 61000-4-2:2009-12; VDE 0847-4-2:2009-12
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
techniques ā Electrostatic discharge immunity test (IEC 61000-4-2:2008);
German version EN 61000-4-2:2009
DIN EN 61000-4-3:2011-04; VDE 0847-4-3:2011-04
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement
techniques - Radiated, radiofrequency, electromagnetic field immunity test
(IEC 61000-4-3:2006 + A1:2007 + A2:2010); German version EN 61000-4-
3:2006 + A1:2008 + A2:2010
DIN EN 61000-4-4:2013-04; VDE 0847-4-4:2013-04
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test (IEC 61000-4-
4:2012); German version EN 61000-4-4:2012
To Next Page
Loading...
