EVS DYVI - Control Panel Configuration; Changing the Control Panel Background Image

TECHNICAL REFERENCE MANUAL Dyvi 2.0.7.2
Control Panel Installation, Cabling and Configuration 43
7.2 Control Panel Configuration
7.2.1 Changing the Control Panel Background
Image
Setting a Custom Background Image
To replace the original Control Panel background image with a custom
image, proceed as follows:
1. Save the new image file as custom.png.
2. Copy the custom.png file to the root directory of an USB key.
3. Insert the USB key in the USB port of the Control Panel.
4. Perform a software reset of the Control Panel. (Main Menu > Delegate
> System > Reset > SW Reset) or perform a power cycle.
5. When the Control Panel is booting up, the old image will still be visible.
Wait a moment until the image is changed.
6. Remove the USB key again.
Note that the size of the new Control Panel background image needs to be
800x480.