EVS Broadcast Equipment SA
Issue 2.0.7.2 September 2021
24 Processing Module Installation and Cabling
6. Processing Module Installation
and Cabling
6.1 Rack Mounting
Adequate ventilation is obviously required for optimum performance. As a
result of this consideration, ensure that no other equipment is located
close to the Processing Module that might increase the Processing
Modules environmental temperature.
Warning
• Remember that fans are used to air cool the equipment and
protect it from overheating.
• Do not block fans intakes during operations.
Having regard to the weight of the processing module chassis, support
guides are required for this unit into the rack mount. The front ears of the
unit are not designed to support its full weight. Applying full weight on
these might result in bending the metal plate.
To Next Page
Loading...
