TECHNICAL REFERENCE MANUAL Dyvi 2.0.7.2
Supervisor 53
10. Supervisor
10.1 Introduction
Device Configuration
The Processing Module and the Control Panel provide a Web Server
interface that gives access to the Dyvi System Supervisor for basic device
configurations which are:
• Software Installations and Software Partition Management
• Dyvi License Management
• Dyvi Cluster Settings
• Network Management
• Time Settings
• Resetting the device
• Log File Access
The password to log into the Supervisor is: dyvilive.
The GUI does not have a supervisor implementation yet. The Supervisor
GUI subsection describes alternative ways to access the related settings.
Network Configuration
The Dyvi factory network addresses are:
• CP 100.10.1.90
• PM 100.10.1.91
• GUI 100.10.1.92
Configuring a new Dyvi System starts with connecting a web browser to a
certain Dyvi-Device by browsing the related network address.
Network management needs to be executed on each Processing Module,
Control Panel and GUI to ensure reliable operation.
To Next Page
Loading...
