Excell PW - 3-3-1 Automatic Backlight Function Setting (FnC 01)

EXCELL PRECISION CO., LTD
PW Service Manual SME300000016
35
3-3-1 Automatic Backlight Function Setting
Select in the general function setting mode to change
the backlight function setting.
LCD displays the last status
Automatic backlight function
When the weight is over 10d, the display backlight will be on. After the weight
is stable for 10 seconds or when the scale returns to zero, the display
backlight switches off.
Press TARE key
Use ON/ZERO or UNITS key
to select function “on” or “
off
Press TARE key to go back
to the advanced function
setting menu
ACTIONS
DISPLAY NOTE
On à backlight function is on
Off à backlight function is off