EXCELL PRECISION CO., LTD
PW Service Manual SME300000016
49
3-5-6 Auto Transmission at Zero
Select in the RS232 serial interface setting mode to
set the Auto Transmission at Zero.
4 When the value of “Auto transmission at zero” set as
, the “Auto transmission at
zero” function is not available. Because when the scale is at zero and keeping stable, the
data are keeping transmitted, that would be the same as “Continuous Transmission”.
ON/ZERO
key ⇒ Increment number by 1
UNITS
key ⇒ Decrement number by 1
TARE
key ⇒ Move cursor one place to the right
NET/GROSS
key ⇒ Move cursor one place to the left
Auto transmission at zero
Use
ON/ZERO
or
UNITS
keys to key in the
desired parameters:
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value