Excell PW User Manual

EXCELL PRECISION CO., LTD
PW Service Manual SME300000016
50
3-5-7 Reset Auto Transmission
Select in the RS232 serial interface setting mode to
Reset Auto Transmission.
4 When the value of “Auto transmission at zero” set as , the “Auto transmission at
zero” function is not available. Because when the scale is at zero and keeping stable, the
data are keeping transmitted, that would be the same as “Continuous Transmission”.
ON/ZERO key ⇒ Increment number by 1
UNITS key ⇒ Decrement number by 1
TARE key ⇒ Move cursor one place to the right
NET/GROSS key ⇒ Move cursor one place to the left
Resetting auto transmission
Use ON/ZERO or UNITS keys to key in the
desired parameters:
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
Press
TARE
key
Use ON/ZERO or UNITS keys
to key in the desired
parameters
Press TARE key
Key in the parameter “00”
Press TARE key to exit
RS232 bi-direction function
setting
Resetting auto transmission
The LCD shows the last setting
n Default setting:
ACTIONS
DISPLAY
NOTE

Excell PW Specifications

General

Brand	Excell
Model	PW
Category	Accessories
Language	English