Managing Data
178 FTB-2/FTB-2 Pro and FTB-4 Pro
Connecting to a Wireless Network
Connecting to a Wireless Network
If you have purchased the RF (Wi-Fi and Bluetooth
®
) option, you can
connect to a wireless network and benefit from all resources that are
available on this network. You can transfer data exactly as you would do
from an Ethernet network. By default, the internal wireless module is
enabled, but not connected to a network.
If you have disabled the Wi-Fi device, you must enable it before trying to
connect to a wireless network (see Enabling or Disabling the Wireless
Communication on page 191).
Note: To save power when your unit is running on batteries, you may wish to
disable the Wi-Fi device when you do not use it.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
