Communicating Through TCP/IP Over Telnet
FTB-2/FTB-2 Pro and FTB-4 Pro 477
Internal Commands of the TCP/IP over Telnet Protocol
Internal Commands of the TCP/IP over Telnet
Protocol
The internal commands allow you to perform certain actions such as send
SCPI commands as a script instead of one by one, force the disconnection
of an active session, view the status of modules and of connected clients,
etc. The internal commands are not case-sensitive.
ABORT BEGIN
Description The ABORT BEGIN command prevents the execution
of the SCPI commands that are enclosed in a BEGIN
and END block, and returns to the READY> prompt in
the Telnet editor window.
Syntax ABORT BEGIN
Examples
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
