Safety Information
FTB-2/FTB-2 Pro and FTB-4 Pro 27
Electrical Safety Information
Electrical Safety Information
The FTB-2 and FTB-2 Pro models use an external AC/DC adapter
connected to an international safety standard three-wire power cable.
The FTB-4 Pro model uses an international safety standard three-wire
power cable. This cable serves as a ground when connected to an
appropriate AC power outlet.
WARNING
If you need to ensure that the unit is completely turned off,
disconnect the power cable and remove the batteries. For more
information on how to remove the batteries, see the section
about replacing the batteries in this user documentation.
Use only the certified power cord that is suitably rated for the
country where the unit is used.
Replacing detachable MAINS supply cords by inadequately
RATED cords may result of overheating of the cord and create a
risk of fire.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
