Introducing the FTB-2/FTB-2 Pro and FTB-4 Pro
FTB-2/FTB-2 Pro and FTB-4 Pro 19
Automatic Fan Speed Management
Automatic Fan Speed Management
Your unit will determine the most appropriate fan speed, depending on the
power requirements and the type of modules you are using.
If the temperature keeps rising and reaches the limit, your unit will turn off.
This safety feature protects the unit and its modules against overheating.
IMPORTANT
Fan speed is always determined to cool down the most
heat-generating modules.
CAUTION
Make sure to use protective covers over empty slots of your unit to
avoid overheating.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
