Accessing Your Unit Remotely
214 FTB-2/FTB-2 Pro and FTB-4 Pro
Working With VNC
Working With VNC
The control of your unit with VNC requires a VNC server (already installed
on your unit) and a VNC viewer (that you must install on your computer).
To be able to connect to the unit using VNC, you must:
Know the IP address of the unit and provide it in the connection
settings on the computer.
Know the password (same for all users by default).
This section provides you with the basic information to control your unit
with VNC.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
