EXFO FTB-2 - Monitoring Remote Commands

Using Your Unit and Modules in an Automated Test Environment
FTB-2/FTB-2 Pro and FTB-4 Pro 287
Monitoring Remote Commands
Monitoring Remote Commands
ToolBox X allows you to monitor remote commands sent to your units, if
desired.
To monitor remote commands:
1. From the main window, tap the Test Tools button.
2. Depending on which type of communication protocol you are using,
select IC Monitor or SCPI Telnet Monitor.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com