EXFO FTB-2 - Installing or Removing FTB Module Adapters

Getting Started with Your Unit
40 FTB-2/FTB-2 Pro and FTB-4 Pro
Installing or Removing FTB Module Adapters
Installing or Removing FTB Module Adapters
You can insert FTBx modules, FTB modules, or a combination of both in
your unit. If you intend to work with FTB modules and your unit is not
already equipped with module adapters, you must first install such
adapters. These adapters must be removed before inserting FTBx
modules.
To install the FTB modules adapters:
1. Position the adapter so that you can see the retaining screw as shown
below.
Retaining screw
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com