EXFO FTB-2 User Manual

Managing Data
186 FTB-2/FTB-2 Pro and FTB-4 Pro
Using the USB to RS-232 Adapter
5. From the device, set the communications parameters.
Note: The COM port number that you set on your device will probably differ from
the one that you used on your unit.
6. From the device, establish communication with the unit using your
favorite communication tool (PuTTY, HyperTerminal, etc.).
IMPORTANT
To be able to establish a communication between the unit and the
device, you must set the following parameters to the same values
as those defined on your unit:
 Speed
 Data bits
 Stop bit
 Parity
 Flow control
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

EXFO FTB-2 Specifications

General

Brand	EXFO
Model	FTB-2
Category	Measuring Instruments
Language	English