Preparing for Automation
FTB-2/FTB-2 Pro and FTB-4 Pro 267
Configuring Your Instruments
Each user who wants to control the instrument from a computer using a
dedicated application must install this application (for more information on
the installation, refer to the application documentation).
The instrument can be controlled both remotely and locally at the
same time.
You will have to configure remote control again in the following cases:
you inserted the module in another slot
you applied changes to applications while the module was not
inserted in its slot.
Note: Some instruments do not support remote control.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
