Troubleshooting
350 FTB-2/FTB-2 Pro and FTB-4 Pro
Restoring Your Unit to Normal Operation
Windows Embedded 8 Standard and Windows 8.1
Pro
When you want to restore your unit, there are several options. The table
below gives an overview of the possibilities.
Method Description
Refresh The unit will be reverted to its initial state.
All data files that were saved to the default
personal folders (Documents, Pictures, etc.) will
still be available once the operation is complete.
If you have installed products and updates since
you purchased your unit, you will have to reinstall
them.
Refer to Microsoft documentation for more
information.
Reset
The unit will be reverted to its initial state.
All data files will be lost once the operation is
complete.
If you have installed products and updates since
you purchased your unit, you will have to reinstall
them.
Refer to Microsoft documentation for more
information.
Restore
The unit will be reverted to the state in which it
was when the WIM file was created.
All data files will be lost once the operation is
complete.
If you have installed products and updates since
the WIM file was created, you will have to
reinstall them.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
