SCPI-Based Errors
444 FTB-2/FTB-2 Pro and FTB-4 Pro
–110 “Command header
error”
An error was detected in the header. This error
message should be used when the device cannot
detect the more specific errors described for errors
–111 through –119.
–111 “Header separator
error”
A character which is not a legal header separator
was encountered while parsing the header; for
example, no white space followed the header, thus
*GMC"MACRO" is an error.
–112 “Program mnemonic
too long”
The header contains more that twelve characters
(see IEEE 488.2, 7.6.1.4.1).
–113 “Undefined header” The header is syntactically correct, but it is
undefined for this specific device; for example,
*XYZ is not defined for any device.
–114 “Header suffix out of
range”
The value of a numeric suffix attached to a
program mnemonic (see IEEE 488.2, Syntax and
Style section 6.2.5.2) makes the header invalid.
–115 “Unexpected number
of parameters”
The number of parameters received does not
correspond to the number of parameters
expected. This is typically due an inconsistency
with the number of instruments in the selected
group (see section on
INSTrument:DEFine:GROup).
–120 “Numeric data error” This error, as well as errors –121 through –129, are
generated when parsing a data element which
appears to be numeric, including the non-decimal
numeric types.This particular error message
should be used if the device cannot detect a more
specific error.
–121 “Invalid character in
number”
An invalid character for the data type being parsed
was encountered; for example, an alpha in a
decimal numeric or a "9" in octal data.
Error
Number
Description Probable Cause
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
