EXFO FTB-860 - Page 110

Test Setup - Test Configurator, Timer, and System
98 FTB-700G/800 Series
Modify Structure Button
 Connector allows the selection of the NetBlazer’s port.
NI/CSU Emulation DS1
ISDN PRI DS1 [1.544 Mbit/s]
E1 [2.048 Mbit/s]
Interface/Rate Connector
OTU2 [10.709 Gbit/s]
OTU1e [11.049 Gbit/s]
OTU2e [11.096 Gbit/s]
OTU1f [11.270 Gbit/s]
OTU2f [11.318 Gbit/s]
OC-192 [9.953 Gbit/s]
STM-64 [9.953 Gbit/s]
Port 1 - SFP+
OTU1 [2.666 Gbit/s]
OC-48[2.488Gbit/s]
OC-12 [622.08 Mbit/s]
OC-3 [155.520 Mbit/s]
OC-1 [51.840 Mbit/s]
STM-16 [2.488 Gbit/s]
STM-4 [622.080 Mbit/s]
STM-1 [155.520 Mbit/s]
STM-0 [51.840 Mbit/s]
Port 1 - SFP
STS-3e [155.520 Mbit/s]
STS-1e [51.840 Mbit/s]
STM-1e [155.520 Mbit/s]
STM-0e [51.840 Mbit/s]
Port 1 - BNC
DS1 [1.544 Mbit/s] Port 1 - Bantam
Port 1 - RJ48C
E1 [2.048 Mbit/s] Port 1 - Bantam
Port 1 - BNC
Port 1 - RJ48C
DS3 [44.736 Mbit/s]
E3 [34.368 Mbit/s]
E4 [139.264 Mbit/s]
Port 1 - BNC
Test Interface/Rate