Test Setup - Test Configurator, Timer, and System
132 FTB-700G/800 Series
EtherBERT, FC BERT, BERT (CPRI), and Unframed BERT
FC Frame
Note: Only available with FC BERT.
Frame Size (Bytes) allows to enter the frame size (in step of 4 bytes) for FC
BERT test application: 40 to 2148 bytes (default). However the minimum
frame size is 64 bytes when the Latency Tag check box is selected.
Latency Tag Insertion
Note: Only available with FC BERT.
Round trip latency measures the average round trip latency (delay)
between the time the data was transmitted and received.
Latency Tag check box when selected, enables latency
measurements.
Pass/Fail Verdict check box when selected, enables the pass/fail
verdict and allows to set the Round-Trip Latency Threshold.
Round-Trip Latency Threshold (ms) allows the selection of the round
trip latency: 0.015 (default) to 8000 ms.
To Next Page
Loading...
