EXFO FTB-860 - Page 195

Test Setup - Test Configurator, Timer, and System
NetBlazer 183
MAC/IP/UDP
 Reliability allows the selection of the reliability level:
Normal (default) or High.
 Monetary Cost allows the selection of the monetary cost level:
Normal (default) or Low.
 Reserved Bit allows the selection of the reserved bit value:
0 (default) or 1.
Differentiated Services (available when DS is selected).
 DSCP Codepoints:
000000 (CS0) (default), 001000 (CS1), 010000 (CS2),
011000 (CS3), 100000 (CS4), 101000 (CS5), 110000 (CS6),
111000 (CS7), 001010 (AF11), 001100 (AF12), 001110 (AF13),
010010 (AF21), 010100 (AF22), 010110 (AF23), 011010 (AF31),
011100 (AF32), 011110 (AF33), 100010 (AF41), 100100 (AF42),
100110 (AF43), 101110 (EF), 110011 (51), 110110 (54), or
User Defined.
 User Defined Codes, available when User Defined has been
selected from the DSCP codepoints, allows to enter a user defined
code from hexadecimal 00 (default) to 3F once the TOS/DS
Config pop-up is closed.
 ECN allows the selection of the Explicit Congestion Notification
code: 00 (Not-ECT) (default), 01 (ECT-1), 10 (ECT 0), or 11 (CE).