Test Setup - Test Configurator, Timer, and System
184 FTB-700G/800 Series
MAC/IP/UDP
UDP
Allows the selection of the source and destination UDP port number.
Source Port is configurable from 0 to 65535; the default is 49184.
Destination Port is configurable from 0 to 65535; the default is
7(echo).
TCP
Allows the selection of the source and destination TCP port number.
Source Port is configurable from 0 to 65535; the default is 49184.
Destination Port is configurable from 0 to 65535; the default is
7(echo).
Payload
For RFC 2544 and EtherBERT, indicates that the frame structure contains a
Payload.
For Traffic Gen & Mon, allows the selection of both user defined header
and pattern. Payload is not configurable when the QoS Metrics Tags
Insertion check box is selected (see the Global tab).
User Defined Header check box when selected (cleared by default)
allows to define a 16-byte header.
Pattern allows the selection of a pattern: 00 to FF (default is CC).
FCS
Indicates that the frame structure contains an Ethernet FCS.
To Next Page
Loading...
