Test Setup - Test Configurator, Timer, and System
194 FTB-700G/800 Series
Network Details (iSAM)
Note: At least one check box (CIR or CIR+EIR) has to be selected. Thus, clearing
the CIR check box while CIR+EIR check box is cleared, will automatically
select the CIR+EIR check box and vice versa.
Note: For Dual Test Set, the CIR and CIR+EIR values are the same (Symmetric)
for both L->R and R->L directions.
CIR (Mbit/s) (Committed Information Rate) check box when selected
(default) sets the service rate guaranteed by the SLA (default is
1Mbit/s).
CIR+EIR (Mbit/s) check box when selected (cleared by default) sets
the best effort allowed traffic for the service. The EIR (Excess
Information Rate) value is equal to the CIR+EIR value minus CIR
(default is 1.5 Mbit/s). The threshold value is configurable from the
defined CIR value for this service to the line rate minus the total CIR
from all services.
Frame Type allows the selection of the frame type and frame size(s).
Frame types choices are: Fixed and EMIX.
Fixed allows to set a single frame size.
EMIX allows to set up to 8 EMIX frame sizes. The EMIX frame
sequence is repeated until the test ends. Default are 64, 128, 512,
1024, and 1518.
Quantity, available with EMIX, allows to select the number of EMIX
frame sizes: 2 to 8 frames (default is 5).
To Next Page
Loading...
