Exmark VERTEX V Series User Manual

Specications
Specications
Systems
Electrical System
Batter y Quantity
8
Rated V oltag e 60 VDC maxim um and
55.2 VDC nominal usag e
Amp Hours 331.2 Ah
Safety Interlock
• LCD indicators appear for the park brak e , dri v e
lev ers , and operator presence in the messag e
displa y on the front control panel.
Note: Because the PTO m ust be diseng ag ed to
star t the mac hine , the LCD indicator will not
illuminate at this time .
• PTO m ust be diseng ag ed and motion control
lev ers in neutral/park to star t mac hine . (It is not
necessar y for the operator to be on the platfor m
to star t the mac hine .)
• Mo w er blades will stop if the right and/or left
side motion control lev er is mo v ed or released
into the PTO diseng ag e position.
Operator Controls
Steering Control: Fing er tip dri v e control lev ers
pro vide inde pendent speed control, braking and
neutral to eac h dri v e wheel for mo ving forw ard or
rev erse , stopping, and po w er tur ning .
T ransmission
• Speeds:
– 0-10 mph (16 km/hr) forw ard.
– 0-4.0 mph (6 km/hr) rev erse .
• Diseng aging the dri v e wheel motor hubs allo ws
the mac hine to be mo v ed when engine is not
r unning .
• T ransmission Fluid T ype: Exmark Synthetic
Electric Motor Dri v e Oil
P ar t No . 146-1159
• T ransmission Fluid Capacity: 5 . oz. (150 mL)
T ires & Wheels
Front Caster
Semi-
Pneumatic
Quantity
2
T read
Smooth
Size 13 x 5-6
Drive T ires
Pneumatic (Air -Filled)
Quantity
2
T read
Hoosier
Size 20 x 10-10
Ply Rating
4
Pressure
13 psi
(90 kP a)
Cutting Deck
• Cutting Width: 52 inc hes (132.1 cm)
• Disc harg e: Side
• Blade Size: (3 ea.): 18.00 inc hes (45.7 cm)
• Number of anti-scalp rollers: 3
• Dec k: Full oating dec k is attac hed to suppor t
frame , remo v able for ser vice . Dec k design allo ws
for m ulc hing or side disc harg e .
• Dec k De pth: 5.5 inc hes (14 cm)
• Cutting Height Adjustment: 1.5 inc h (3.8 cm)
to 5 inc hes (12.7 cm) in 1/4 inc h (6.35 mm)
increments .
• Mulc hing Kit: Optional
Dimensions
Overall W idth:
Deector Up 53.75 inc hes (136.5 cm)
Deector Do wn 65.00 inc hes (165.1 cm)
Overall Length:
Platfor m Up 61.50 inc hes (156.2 cm)
Platfor m Do wn 77.25 inc hes (196.2 cm)
12

Exmark VERTEX V Series Specifications

General

Brand	Exmark
Model	VERTEX V Series
Category	Lawn Mower
Language	English