Operation
g373297
Figure 17
1. The parking brake is engaged.
2. One or both control levers are down in the center ,
unlocked position.
3. The PT O is engaged.
T esting the Safety-Interlock System
Service Interval : Before each use or daily
T est the safety-interloc k system before y ou use the
mac hine eac h time .
Note: If the safety system does not operate as
described, ha v e an A uthorized Ser vice Dealer re pair
the safety-interloc k system immediately .
1. Star t the mac hine .
2. With both motion-control lev ers outw ard in the
P ark position, press the On position on the PTO
switc h.
Note: T he mo w er blades should not eng ag e .
g377625
Figure 18
3. Mo v e 1 lev er do wn to the center , unloc k ed
position and press the On position on the PTO
switc h.
Note: T he mo w er blades should eng ag e .
g377624
Figure 19
4. R elease the lev er to the P ark position.
Note: T he blades should stop .
g377625
Figure 20
5. Mo v e 1 lev er do wn to the center , unloc k ed
position and press the On position on the PTO
switc h.
Note: T he mo w er blades should eng ag e .
21
To Next Page
Loading...
