Maintenance
Checking the Wheel-Lug Nuts
Service Interval : After the rst 100
hours —Check the
wheel-lug nuts.
Chec k and tor que the wheel-lug n uts to 75 to 88 N∙m
(55 to 65 ft-lb).
Changing the T ransmission Fluid
Service Interval : After the rst 50 hours
Every 500 hours
F luid type: Exmark Synthetic Electric Motor Dri v e
Oil
Capacity: 150 mL (5 oz)
1. P ark the mac hine on a lev el surface , diseng ag e
the PTO , and mo v e the motion-control lev ers
outw ard to the P ark position.
2. Shut off the mac hine , remo v e the k ey , and w ait
for all mo ving par ts to stop before lea ving the
operating position.
3. R emo v e the tire .
g380066
Figure 50
4. Place a drain pan under the transmission.
5. R emo v e the top plug and bottom plug . Allo w the
uid to drain.
g380054
Figure 51
6. Install the bottom plug and tor que it to 7 to 8
N∙m (62 to 70 in-lb).
7. R emo v e a side plug .
8. Add uid, as specied at the beginning of this
procedure , through the top hole until the lev el
reac hes the side plug opening .
g380053
Figure 52
9. Install the top plug and side plug . T or que them
to 7 to 8 N∙m (62 to 70 in-lb).
10. Install the tire and tor que the lug n uts to 75 to
88 N∙m (55 to 65 ft-lb).
11. R e peat for the other transmission.
41
To Next Page
Loading...
