Explorer GT 50 - Type Identification; Break-in Procedure

5
TYPE IDENTIFICATION
཰
ENGINE NUMBER
ENGINE NUMBER཰LVFDUYHGRQUHDUFUDQNFDVHDV 
6KRZQLQILJXUH
Both FRAME NUBER AND ENGINE NUMBER are
Designed specially for registering your scooter
and ordering spare parts.
FUEL AND ENGINE OIL
Be sure to use specified fuel and engine oil.
Some specifications are as follows:
FUEL
Unleaded, the minimum octane number is 95 or more.
ENGINE OIL
For GENERIC CCI SYSTEM, we recommend special engine oil, you can choose high quality two-stroke
engine oil (without being diluted) if without special oil.
GEAR OIL
Use high quality, all-purpose SAE90 engine oil for scooter.
BREAK-IN TIME
General requirements are as follows᧶
 Limit break-in speed᧶
At the first 1000KMS᧤600 miles᧥mileage᧨play throttle less than 4/5 throttle᧷
After mileage exceeds 1000KMS᧤600 miles᧥᧨play full throttle᧷
 Don’t run engine too long during break-in time, and try to change throttle position.