76
Side cover removal
1. remove seat and helmet barrel by opening seat and
loosing tightening screw
2.
loose hexad screw ི and remove decorating capཱ
rear carrier and oil tank lock ཱི᧨remove side coverཱུ
by loosing side cover screwུྲྀ᧷
3.
unlock oil pump cap and remove it, two tapping screw are
exposed, remove them; remove tapping screw
ླྀ᧷then
remove side cover
ཹ
side installation
4. the sequence of installation is the reverse of removal.
ཱི
ི
ྲྀ
ཱ
ཱུ
ི
ྲྀ
ཷ
ཹ
ཹ
ླྀ
To Next Page
Loading...