EasyManuals Logo

Extreme Networks ExtremeSwitching X440-G2 Series User Manual

Extreme Networks ExtremeSwitching X440-G2 Series
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
3 At the login prompt, log in using the default user name admin.
For example:
login: admin
Note
For the initial password, simply press [Enter].
When you have successfully logged on to the system, the command line prompt displays the system
name (for example, SummitX670-G2#) in its prompt. You are logged in with administrator
privileges, which gives you access to all switch functions.
4 Respond to the screen prompts to configure the level of security you need.
Note
For more information about logging in to the switch and configuring switch management
access, see the ExtremeXOS 22.6 User Guide.
5 Enter show version.
The switch serial number is displayed, as highlighted in the following example. Make a note of this
number for future reference.
Transit.3 # show version
Switch : 800444-00-05 0723G-01234 Rev 5.0 BootROM:
Configure the switch's IP address for the management virtual LAN (VLAN) by following the steps in
Configuring the Switch's IP Address for the Management VLAN on page 222.
Configuring the Switch's IP Address for the Management VLAN
You can configure the switch's IP address for the management virtual LAN (VLAN).
Note
The management port is part of the mgmt VLAN. This VLAN membership cannot be changed.
Log in to the management console, connect to the switch, and follow these steps.
1 Assign a name, IP address, and default subnetwork mask for the VLAN as shown in the following
example.
configure vlan vlan_name ipaddress nn.nn.nn.nn 255.255.255.0
Your changes take eect immediately.
2 Enter save to save your configuration changes so that they will be in eect after the next system
reboot.
Note
For more information about saving configuration changes, see the ExtremeXOS 22.6 User
Guide.
The configuration is saved to the configuration database of the switch.
Configure the ExtremeXOS software on the switch by following the steps in Configuring ExtremeXOS
on the Switch on page 223.
Installing Your Extreme Networks Switch
ExtremeSwitching and Summit Switches: Hardware Installation Guide 222

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Extreme Networks ExtremeSwitching X440-G2 Series and is the answer not in the manual?

Extreme Networks ExtremeSwitching X440-G2 Series Specifications

General IconGeneral
Form FactorRack-mountable
VLAN SupportYes
Humidity5% to 95% non-condensing
ModelX440-G2 Series
Port TypeGigabit Ethernet
Switching Capacity176 Gbps
Forwarding Rate131 Mpps
StackingYes, up to 8 switches
Layer SupportLayer 2/3
Operating Temperature0°C to 50°C
Product TypeSwitch
Jumbo Frames9216 bytes
AC Power Supply100-240 VAC, 50-60 Hz
Storage Temperature-40°C to 70°C
Port Configuration24 or 48 ports
Power over Ethernet (PoE)Optional

Related product manuals