Extreme Networks ExtremeSwitching X440-G2 Series User Manual

Figure 185: Attaching the Rack-Mounting Brackets
1 = Rack-mounting brackets (2) 2 = M3x6mm flathead screws (8)
2 With the rack-mounting brackets attached, position the RPS-500p between the vertical rack rails of
the 19-inch rack as shown in Figure 186.
Figure 186: Fastening the RPS-500p to the Rack
1 = RPS-500p
3 = Mounting screws (4)
2 = Rails of 19-inch rack
3 Fasten the RPS-500p securely to the rack rails using four customer-supplied rack screws.
Installing External Power Supplies
ExtremeSwitching and Summit Switches: Hardware Installation Guide 239

Extreme Networks ExtremeSwitching X440-G2 Series Specifications

General

Form Factor	Rack-mountable
VLAN Support	Yes
Humidity	5% to 95% non-condensing
Model	X440-G2 Series
Port Type	Gigabit Ethernet
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
Stacking	Yes, up to 8 switches
Layer Support	Layer 2/3
Operating Temperature	0°C to 50°C
Product Type	Switch
Jumbo Frames	9216 bytes
AC Power Supply	100-240 VAC, 50-60 Hz
Storage Temperature	-40°C to 70°C
Port Configuration	24 or 48 ports
Power over Ethernet (PoE)	Optional