Table 297: Power Specifications (continued)
DC output -55 VDC, 15 A maximum
+12.0 VDC, 0.1 A minimum, 15 A maximum
Maximum output power 1005 W
Table 298: Environmental Specifications
Operating temperature 0°C to 50°C (32°F to 122°F)
Storage temperature -40°C to 70°C (-40°F to 158°F)
Operating relative humidity 10% to 90% non-condensing
STK-RPS-1005PS Connector
For pin location and function, refer to Figure 256 and Table 299 on page 391, respectively.
Note
The following information is for troubleshooting purposes only. For proper operation, use only
the RPS cable supplied with the STK-RPS-1005PS. This cable is specially designed for this
application and meets all necessary regulatory and safety standards.
Caution
The use of non-approved cables will void your warranty.
Figure 256: STK-RPS-1005PS Connector Pin Locations
1 = Pin 1
3 = Pin 10
2 = Pin 9 4 = Pin 18
Technical Specifications
ExtremeSwitching and Summit Switches: Hardware Installation Guide 390
To Next Page
Loading...
