Software- and Web Page-based Setup and Control, cont’d
4-40
PRELIMINARY
MLC 226 Series • Software-and Web Page-based Setup and Control
Embedded Web Pages
The MLC 226 IP features an embedded Web server, which includes factory set
Web pages. These pages can be replaced with user-designed files, but the default
Web pages provide many basic features for monitoring, configuring, and
controlling the controller via a Web browser. These Web pages are based on and
provide a subset of the features of the Windows-based configuration program. This
section provides an overview of the embedded Web pages. For details on settings,
refer to descriptions in the corresponding section of the “Configuration Software
for Windows” section.
To access the embedded Web pages,
1. Launch a Web browser (Internet Explorer) on the connected PC, and enter
the controller’s IP address in the address field.
2. In the Enter Network Password
dialog box, shown at right, enter
the controller’s IP address or text
of your choice in the User Name
field, type in the administrator
password in the Password field,
and click OK. The MLC 226 IP’s
default Web page appears.
Passwords must contain 1 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive.
Administrators have access to all of the Web pages and are able to make
changes to settings.
Users can access the System Status and Control: User Mode pages only.
To Next Page
Loading...
Need help?
General
