Digital Brushless AC Servo Drive system - Ref. 1809 BCSD-111/116
Attached table -1
Note:
1. About Pn146, please set one value according to axis response, and in case using new drive (-01)
to replace old drive, in order to keep original axis response, Pn146 should be set with 0.
2. About Pn008.0, for machines that do commissioning with new drives (-01), Pn008.0 will always be
1, and in case using new drive (-01) to replace old drive, in order to keep original axis response,
Pn008.0 should be set with 0.
Drive Motor Pn840 Pn008.0 Pn146 Pn147 Pn148
BCSD-08AMA-01 FBS-08ADB 0X0203 1 0 or 4...128 6000 800
BCSD-10AMA-01 FBS-10ADB 0x0303 1 0 or 4...128 3600 230
BCSD-10DMA-01
FBM-10DDA 0x0303 1 0 or 4...128 9500 15
FBM-10DDB 0x0313 1 0 or 4...128 7500 300
BCSD-15DMA-01
FBM-15DDA 0x0403 1 0 or 4...128 8500 10
FBM-15DDB 0x0413 1 0 or 4...128 4000 50
BCSD-20DMA-01
FBM-20DDA 0x0503 1 0 or 4...128 6500 10
FBM-20DDB 0x0513 1 0 or 4...128 2700 20
BCSD-30DMA-01 FBM-30DDA 0x0603 1 0 or 4...128 8500 10
BCSD-50DMA-01 FBM-50DDA 0x0703 1 0 or 4...128 3500 10
To Next Page
Loading...
