Digital Brushless AC Servo Drive system - Ref. 1809 BCSD-87/116
Note:
Press the ENTER key during servo ON does not initialize the parameter settings.
Initialize the parameter settings with the servo OFF.
5.2.3. Operation in JOG Mode
Follow the procedures below to operate the servomotor in JOG mode.
5. Release the ENTER key to return to the utility function mode display Fn001.
1. Press the MODE key to select the utility function mode.
2. Press the INC or DEC key to select the function number of JOG mode operation.
3. Press the ENTER key to enter into JOG operation mode.
4. Press the MODE key to enter into servo ON (servomotor power ON) status.
5. Press the MODE key to switch between the servo ON and servo OFF status. The servodrive must
be in servo ON status when the servomotor is running.
6. Press the INC or DEC key to rotate the servomotor.
7. Press the ENTER key to return to utility function mode display Fn002. Now the servo is OFF
(servomotor power OFF).
To Next Page
Loading...
Need help?
General
