Fagor BCSD Series User Manual

Digital Brushless AC Servo Drive system - Ref. 1809 BCSD-93/116
5.2.9. Absolute Encoder Multiturn Data and Alarm Reset
Important:
This function will clear the absolute position of the encoder; the mechanical safety must be noted.
When the multiturn data is cleared, other encoder alarms will be reset at the same time.
5.2.10. Absolute Encoder Related Alarms Reset
1. Press the MODE key to select the utility function mode.
2. Press the INC or DEC key to select the utility function number Fn010.
3. Press the ENTER key, the display will be shown as below.
4. Press the MODE key to reset the absolute encoder multiturn data and alarm.
5. Thus the absolute encoder multiturn data and alarm reset is completed.
1. Press the MODE key to select the utility function mode.
2. Press the INC or DEC key to select the utility function number Fn011.
3. Press the ENTER key, the display will be shown as below.
4. Press the MODE key to clear the alarms.
5. Thus the absolute encoder related alarms reset is completed.

Fagor BCSD Series Specifications

General

Brand	Fagor
Model	BCSD Series
Category	Servo Drives
Language	English