FARGO electronics S000256 - Selecting the Track LRC Generation Option

RESTRICTED USE ONLY FARGO Electronics, Inc.
Selecting the Track LRC Generation option
Use this option to customize the LRC Generation Mode (used to encode the magnetic data
on the currently selected Track). (Note: The default ISO Standard selections for this option
are Track 1: EVEN, Track 2: EVEN, and Track 3: EVEN.)
Step Procedure
1 Select NO LRC to change the LRC Generation to none.
OR
Select Even Parity to change the LRC Generation to Even Parity.
OR
Select Odd Parity to change the LRC Generation to Odd Parity.
Persona® C25 Card Printer User Guide (Rev. 4.0)
109