FARGO electronics S000256 - Selecting the Track Character Size Option

RESTRICTED USE ONLY FARGO Electronics, Inc.
Selecting the Track Character Size option
Use this option to customize the Character Data Size (Bits per Character) used to encode
the magnetic data on the currently selected Track. (Note: This character size includes the
parity bit, if enabled.) (Note: The default ISO Standard selections for this option are Track
1: 7 BPC, Track 2: 5 BPC, and Track 3: 5 BPC.)
Step Procedure
1 Select 5 Bits to change the bits per character to 5 BPC.
OR
Select 7 BPI to change the bits per character to 7 BPC.
OR
Select 8 BPI to change the bits per character to 8 BPC.
Persona® C25 Card Printer User Guide (Rev. 4.0)
110