Maintenance, 3000h
4812164601_C.pdf 2023-01-05
Coolers
Checking - Cleaning
Fig. Engine compartment
(CC1100/C VI - CC1200/C VI)
1. Water cooler
2. Hydraulic fluid cooler
2
1
Make sure that the air flow through the coolers (1) and
(2) is unobstructed. Dirty coolers are blown clean with
compressed air or washed clean using a
high-pressure water cleaner.
Blow air or direct water through the cooler in the
opposite direction to that of the cooling air.
Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler.
Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler.
1
2
Fig. Engine compartment
(CC1300/C VI - CC1400/C VI)
1. Radiator
2. Hydraulic fluid cooler
Wear protective goggles
when working with
compressed air or
high-pressure water jets.
Wear protective goggles
when working with
compressed air or
high-pressure water jets.
212
To Next Page
Loading...
